コンテンツにスキップ

FAQ - U2AUDIO7-1 Hardware Connection & Audio Settings


>> Go Back To U2AUDIO7-1

The Digitallife U2AUDIO7-1 is a hardware based external 7.1 Sound Card, which works on Windows 10 / 8 / 7 with the given application software. The merits of the U2AUDIO7-1 are:

1. Works with Headphone ( Stereo, 3.5mm 3-position headphone or earphone)
2. Works with 2 / 4 / 6 / 8 speakers (3.5mm 3-position audio jack)
3. Works with S/PDIF stereo speakers

Notice

1. Control Button - The buttons control only 3.5mm audio jack outputs / inputs sound effects. (Vol + / Vol - , MIC Mute, Vol Mute). The S/PDIF is a pass-through design, so the audio (Vol + / Vol - )  via S/PDIF can only be controlled on your PC's audio settings.
2. The MIC supports only mono sound input


In order to performs the best effects with the U2AUDIO7-1, we have the following suggestions.

Works on Stereo Headphone

Hardware Connection - HEADPHONES

Audio Settings

System Input - 2CH
DSP Mode - 7.1 Virtual / Xear ON
Output - Analog Output - Headphone
S/PDIF Output - OFF ( To save power, we do not suggest ON S/PDIF, unless you need S/PDIF as output.)

Works on 2CH / 4 CH / 6 CH / 8 CH Channel Speaker

Hardware Connection - FRONT / SURROUND / CENTER BASS / BACK

Audio Settings

System Input - 2CH / 4CH / 6CH / 8CH
DSP Mode - 7.1 Virtual / Xear ON
Output - Analog Output - 2 Speakers / 4 Speakers / 6 Speakers / 7.1 Speakers
S/PDIF Output - OFF ( To save power, we do not suggest ON S/PDIF, unless you need S/PDIF as output.)

 

 

製品の比較

{"one"=>"比較する2つまたは3つのアイテムを選択します", "other"=>"選択された3つのアイテムの{{ count }}"}

比較する最初のアイテムを選択します

比較する2番目の項目を選択します

比較する3番目の項目を選択

比較