FAQ Collections — AVC05-V2

AVC08-V2 / AVC05-V2 -Windows OS Has no audio

Pubblicato da VTOP-eMall il

OS:  windows10VHS: Panasonic PV-D4762Cannot record audio, although when first installed it did record audio for about  a dozen tapes. Nothing changed from one tape to another. Solution Since the Video-Grabber Recorded some tapes successfully. So let's check w/ the following 3-steps. Recording Settings ---> Audio Device: Settings --> "Enable" Pin Line Input Mix.  

Leggi di più →

AVC05-V2 With Magnétoscope Panasonic NV-SD45

Pubblicato da ChenChris il

AVC05-V2 on Magnétoscope Panasonic NV-SD45 can not get Audio. And the OS is Windows 10. Solution: This is often caused by an incorrect setting in your windows sound mixer properties. You will need to set the default recording device to the "Line (USB VIDBOX FW Audio)".Step 1 - Open Device Manager.Step 2 - Video Device Settings1. Audio Device: Line (USB VIDBOX FW Audio)2. Video Processing Type: NTSC or PAL - According to your actual Video Standards.3. Open "Video Settings" by clicking the Settings Button of the right side of "Video Device: USB2.0 VIDBOX FW". "Composite" video is suggested. S-Video requires additional R/L Stereo...

Leggi di più →

AVC05-V2 - Select Device Can Not be Used, Select Another Device

Pubblicato da ChenChris il

<< Back to AVC05-V2 I have followed your instructions as directed, still no luck. The capture screen brings up the message " Select device can not be used, select another device "Windows 10 version 1909, Dell 64-bit, core i3,Settings on capture screen indicate under video USB2xFW and the same for audio USB2 FW.    >> Back to AVC05-V2

Leggi di più →

Italiano