FAQ Collections

The U2AUDIO7-1 cannot output 5.1 from Logitech Z-640 system

Pubblicato da VTOP-eMall il

The U2AUDIO7-1 cannot output 5.1 from Logitech Z-640 system

U2AUDIO7-1 on Logitech Z-640 system. It works on 6.1 but the sound output seems not the right channel. But on another PC, Z-640 seems the right output. Reply The U2AUDIO7-1's Standard Definition Audio Output. (Please neglect the U2AUDIO7-1's Audio Jack's Color.) 1. FRONT - Left/Right2. SURROUND - Left Surround/Right Surround3. CENTER/BASS - CENTER(Left Earphone) / BASS (Right Earphone)4. BACK - Left/Right (Only at 7.1 mode) STEP 1 - Make Settings on U2AUDIO7-1's Setting Panel. The Logitech Z-640 is a 6-channel Audio Speaker System, so let's set the U2AUDIO7-1's Audio output to 6-channel.   STEP 2 -Test the Audio Output Channel...

Leggi di più →

Does V.TOP USB232A-B Works With Raspberry Pi?

Pubblicato da VTOP-eMall il

Well, we tested V.TOP USB232A-B on Raspberry Pi 3B+ (Debian GNU). The following videos are for your reference. Raspberry Pi 3B+ reads it without installing any drivers.   Step 1 - Raspberry PI 3B+ Configuration   Step 2 - How to enter into Raspberry PI 3B+   Step 3 - Check the Hardware   Today's Promotion Code - VBKCD946PR4X

Leggi di più →

V.TOP CU200 @ Raspberry pi

Pubblicato da ChenChris il

The two connections are on the same IP segment. They are configured in Linux with no IP address. Traffic will be bridged across the 2 ports as shown in the diagram. The USB to Dual Ethernet cable is attached to a USB 3.0 port on a Raspberry Pi running Debian 10 Buster.When I power on the Raspberry Pi we see only one ethernet interface on the adapter. When I unplug the adapter, and connect to another USB3.0 port on the Raspberry Pi, both ethernet interfaces appear under Linux.Once both ethernet interfaces are found, the cable operate in bridge more with no...

Leggi di più →

AVC08-V2 / AVC05-V2 -Windows OS Has no audio

Pubblicato da VTOP-eMall il

OS:  windows10VHS: Panasonic PV-D4762Cannot record audio, although when first installed it did record audio for about  a dozen tapes. Nothing changed from one tape to another. Solution Since the Video-Grabber Recorded some tapes successfully. So let's check w/ the following 3-steps. Recording Settings ---> Audio Device: Settings --> "Enable" Pin Line Input Mix.  

Leggi di più →

AVC05 - (Windows 10) Where is my recorded file

Pubblicato da VTOP-eMall il

Model No.: AVC05-V2 VHS to DVD programme can not record video files as mpg4 format. Can you help? Reply honestech VHS to DVD 4.0 SE is an official Commercial Video Catpure Application Software for Analog Video Capture Device. The max resolution is truly limited compared to present 1080p files. It automatically creats MPEG format @ Level 2 (MPEG2). The details are as following: However, it is a luck that AVC05-V2 also supports on Potplayer or OBS. As for how to use VHS to DVD to record video. Let's take a look at the following instructions. Step 1 - Connect Hardware...

Leggi di più →


Italiano