FAQ Collections

AV202-B USB Audio Grabber's Recording on macOS

Publié par VTOP-eMall le

I do not know if it was the product or my computer set up but it is not working correctly. When I try to import from cassette tape or vinyl the sound is shuttering and clipped. I have used the red and white jacks as well as straight 3.5 mm jack to jack connections with the same result. The audio receiver used has worked flawlessly before. I also used three audio input programs with the same poor audio quality captured. Solution How can I prevent clicky recordings on Mac?

En savoir plus →

The U2AUDIO7-1 cannot output 5.1 from Logitech Z-640 system

Publié par VTOP-eMall le

The U2AUDIO7-1 cannot output 5.1 from Logitech Z-640 system

U2AUDIO7-1 on Logitech Z-640 system. It works on 6.1 but the sound output seems not the right channel. But on another PC, Z-640 seems the right output. Reply The U2AUDIO7-1's Standard Definition Audio Output. (Please neglect the U2AUDIO7-1's Audio Jack's Color.) 1. FRONT - Left/Right2. SURROUND - Left Surround/Right Surround3. CENTER/BASS - CENTER(Left Earphone) / BASS (Right Earphone)4. BACK - Left/Right (Only at 7.1 mode) STEP 1 - Make Settings on U2AUDIO7-1's Setting Panel. The Logitech Z-640 is a 6-channel Audio Speaker System, so let's set the U2AUDIO7-1's Audio output to 6-channel.   STEP 2 -Test the Audio Output Channel...

En savoir plus →

Does V.TOP USB232A-B Works With Raspberry Pi?

Publié par VTOP-eMall le

Well, we tested V.TOP USB232A-B on Raspberry Pi 3B+ (Debian GNU). The following videos are for your reference. Raspberry Pi 3B+ reads it without installing any drivers.   Step 1 - Raspberry PI 3B+ Configuration   Step 2 - How to enter into Raspberry PI 3B+   Step 3 - Check the Hardware   Today's Promotion Code - VBKCD946PR4X

En savoir plus →

V.TOP CU200 @ Raspberry pi

Publié par ChenChris le

The two connections are on the same IP segment. They are configured in Linux with no IP address. Traffic will be bridged across the 2 ports as shown in the diagram. The USB to Dual Ethernet cable is attached to a USB 3.0 port on a Raspberry Pi running Debian 10 Buster.When I power on the Raspberry Pi we see only one ethernet interface on the adapter. When I unplug the adapter, and connect to another USB3.0 port on the Raspberry Pi, both ethernet interfaces appear under Linux.Once both ethernet interfaces are found, the cable operate in bridge more with no...

En savoir plus →

AVC08-V2 / AVC05-V2 -Windows OS Has no audio

Publié par VTOP-eMall le

OS:  windows10VHS: Panasonic PV-D4762Cannot record audio, although when first installed it did record audio for about  a dozen tapes. Nothing changed from one tape to another. Solution Since the Video-Grabber Recorded some tapes successfully. So let's check w/ the following 3-steps. Recording Settings ---> Audio Device: Settings --> "Enable" Pin Line Input Mix.  

En savoir plus →


français