I/O Device

How to Setup DriverGenius USB-Serial Adapter on Windows 10 Host to XP Guest - Virtual Box

Geposted von ShopDriverGenius am

Virtualbox running on a Win 10 64bit host with a XP SP3 32bit guest. On host i have installed a USB to serial adapter, i need to use this in Windows XP guest as well . Have been searching around a bit but haven't been able to find working/correct info on how to set it up.Settings->Serial Ports->Port 1:Enable Serial Port: 'Checked'Port number: 'COM 1' (i have set it to COM 1 on host in Device Manager).Port mode: 'Host pipe' ?Connect to existing pipe/socket: ?Path/Adress: ?In Settings->USB:Enable USB controller: 'Checked'and i have added the usb to serial adapter to the list. Reply from...

Weiterlesen →

Serial Port Pinouts for RJ45 Serial Cables

Geposted von ShopDriverGenius am

In the market there are the following types of Serial - RJ45 Cables. Pin1 = CTS  | Pin2 = DSR  | Pin3 = RX | Pin4 = GNDPin5 = GND | Pin6 = TX | Pin7 = DTR | Pin8 = RTS When attached to a Beige RJ45 to DB9 Adaptor which we sell, the pins are translated as per below drawing. For the Null adapter

Weiterlesen →

Does DriverGenius U2RJ45-X Works with Moxa Terminal Server CN2610-16-2AC Console Port?

Geposted von ShopDriverGenius am

DriverGenius U2RJ45-A or U2RJ45-C were designed for Cisco and HP Terminal Server Console Port. Cisco and HP doesn’t have DCD (Data Carrier Detect) on the console port. Moxa NPort serial server connects to serial devices to Ethernet. The table below is the pinout to connect your Moxa NPort device to Cisco console for remote network access via the serial port. Moxa Pin Colour Moxa NPort Signal Cisco Pin Cisco Console Signal 1 White/Green DSR 2 Not Used 2 Green RTS 1 DTR 3 White/Orange GND 4 TxD 4 Blue TxD 6 GND 5 White/Blue RxD5 3 GND 6 Orange DCD 5 RxD...

Weiterlesen →

DriverGenius USB-Serial Works with Mulberry RS232 Serial Port GPS Receiver?

Geposted von ShopDriverGenius am

Mulberry has the following RS232 Serial Port GPS Receivers 1. RS232 GPS Receiver​ with Ublox M8 Chipset​ 2. RS232 GPS Receiver​ with MediaTek MT3337 Chipset

Weiterlesen →

DriverGenius USB-Serial Works with Tech2?

Geposted von ShopDriverGenius am

The Tech2 is a scanning device which is able to let you deep dive into the internals of the various systems in your vehicle. While generic scanners can show and decode error codes, the Tech2 has the ability to get into the details of the error. Also the Tech2 is able to set brand/type specific settings. The Tech2 is not a engine tuning tool but is able to give you good insights on the status of the car. The Tech2 communicates using the following protocol properties. Tech2 RS-232 Setting Standard RS-232 Speed 115200 bit/s Data bits 8 bits Parity not...

Weiterlesen →