Network Devices

Download DriverGenius USB-2.5G Network RealTek RTL8156 2.5G Driver or DriverGnenius website.  # sudo tar jxvf r8152.53.56-2.15.0.tar.bz2, you will get the following unzipped files. 2021-12-21 11:36 <DIR> .2021-12-21 11:36 <DIR> ..2021-03-02 16:40 3,823 50-usb-realtek-net.rules2021-04-20 11:37 19,761 compatibility.h2021-12-21 11:36 0 list.txt2020-09-14 15:36 1,041 Makefile2021-04-20 10:42 609,871 r8152.c2020-08-04 14:37 962 ReadMe.txt # make# make install you may have to run the following command after installing the driver. # sudo depmod -a # sudo update-initramfs -u More of the descriptions, please refer to Readme.txt.  

Thanks to AX88179 (instead of AX88179A), DriverGenius CU200 USB3.0 Dual Gigabit Port Ethernet Adapter now works on Ubuntu 20.04.3 LTS. lsb_release -a sudo dmesg | grep usb

The two connections are on the same IP segment. They are configured in Linux with no IP address. Traffic will be bridged across the 2 ports as shown in the diagram. The USB to Dual Ethernet cable is attached to a USB 3.0 port on a Raspberry Pi running Debian 10 Buster.When I power on the Raspberry Pi we see only one ethernet interface on the adapter. When I unplug the adapter, and connect to another USB3.0 port on the Raspberry Pi, both ethernet interfaces appear under Linux.Once both ethernet interfaces are found, the cable operate in bridge more with no...